Request a Quote

Power distribution equipment

Nonsegregated Phase Busway

Specify nonsegregated phase busway around its electrical duty, physical route, enclosure environment, and connection points. Our U.S.-built equipment is custom fabricated and shipped nationwide.

01 / BUILT WITH PURPOSE SWITCHGEAR BUILDERS OHIO

Enclosed electrical switchboard with meters and breakers
REPRESENTATIVE
EQUIPMENT
01
Made in USAAmerican manufacturing
02
UL 891 assembliesFor applicable low-voltage switchboards
03
Short lead timesTiming quoted per project

How Nonsegregated Phase Busway Is Arranged

Nonsegregated phase busway places the phase conductors within a common enclosure without individual grounded barriers separating each phase. The enclosure supports and protects the conductors, while insulating supports maintain their positions. This construction differs from busway designs that use barriers between phases; the choice depends on system design, installation conditions, and applicable requirements.

A project specification should identify the system voltage, phase and wire arrangement, frequency, intended current rating, and grounding approach. Those values must be established for the actual installation, not inferred from a general product description. The responsible engineer should verify system compatibility and applicable codes before selecting a configuration or requesting a quotation.

Conductor Supports and Phase Spacing

Phase spacing is part of the busway’s engineered geometry, not simply a field preference. Conductor size, insulation system, support arrangement, enclosure dimensions, and electrical duty influence the spacing and clearances used in a design. Short-circuit forces and thermal conditions also matter, so any proposed arrangement requires review against the equipment design and project requirements.

Provide the required conductor material if specified, phase sequence, neutral provisions, grounding requirements, and system data with the inquiry. Include drawings or design criteria that define clearances and connection orientation where applicable. Do not assume that a spacing dimension from another installation transfers to this busway; the manufacturer and responsible engineer must confirm the suitable arrangement.

Enclosure Form and Installation Environment

The common enclosure forms an important part of the assembly. Its dimensions, access covers, joints, and mounting interfaces affect installation, inspection, and routing through the building. Enclosure material and finish should be selected for the location and project specification, with attention to indoor or outdoor exposure, corrosion concerns, and mechanical protection requirements.

Identify the route environment, including moisture, dust, temperature, washdown, corrosive exposure, and available installation space. State any required enclosure construction or environmental classification for review rather than assuming a standard feature. The design team should confirm that the specified enclosure and installation method suit the location, and coordinate supports and clearances with structural and architectural conditions.

Route Geometry, Sections, and Joints

Busway routing must account for straight runs, changes in direction, elevation transitions, and interfaces with other building systems. The layout determines section lengths and the need for elbows or other fittings. Tight turns, obstructions, access limitations, and movement at building joints can affect both fabrication and installation, making coordinated route drawings valuable before equipment is released for production.

For a quote, provide a dimensioned route or coordinated plan and elevation drawings, with start and end points, elevations, and known obstacles. Identify the intended installation sequence and any limits on section length or handling access. The manufacturer can evaluate the requested geometry, while the contractor and engineer confirm field dimensions, supports, and fit with surrounding equipment.

Connections to Switchgear and Other Equipment

Busway connections may interface with switchboards, low-voltage switchgear, transformers, panelboards, or other designated equipment. The connection method and orientation must match the equipment’s bus arrangement and the project’s physical layout. Consider phase sequence, neutral and ground continuity, termination access, and the space needed to install and maintain the connection safely.

Connection drawings should identify the mating equipment, connection location, orientation, conductor arrangement, and any required transition section. Include manufacturer and model information for adjoining equipment when available, plus terminal or interface details from approved drawings. Compatibility should be verified by the responsible engineer and equipment suppliers; a generic connection assumption is not a substitute for an engineered interface review.

Electrical Ratings and Coordination Inputs

Specify the electrical ratings required for the application, including system voltage and continuous current, and provide available fault-current information when established. Protection and coordination decisions influence the overall distribution design and should be evaluated with upstream and downstream devices. No rating or protective capability should be presumed from the term nonsegregated phase busway alone.

The engineer should determine applicable design criteria, including grounding, neutral loading, temperature conditions, and any project-specific short-circuit requirements. Provide utility or system data, protective-device information, and relevant study results as appropriate. The final design must be checked against governing codes and the installation’s actual operating conditions, with the utility and authority having jurisdiction consulted where relevant.

Submittals, Fabrication, and Field Coordination

A complete inquiry helps resolve design questions before fabrication. Useful documents include a one-line diagram, route drawings, equipment connection details, specifications, environmental conditions, and required ratings. Flag deviations, schedule constraints, and review milestones explicitly. Missing interface information can lead to clarification requests or drawing revisions, so early coordination among the engineer, contractor, and equipment suppliers is practical.

Our team manufactures new equipment in the United States using American components and offers custom fabrication for project-defined configurations, with short lead times and nationwide shipping. Lead time depends on the approved design, scope, and production schedule. Confirm current timing during quotation, and review submitted drawings for dimensions, interfaces, and project requirements before authorizing manufacture.

Information to Include in a Quote Request

A useful quote package identifies quantity, system voltage, phase and wire arrangement, required current rating, route length and geometry, enclosure conditions, and each equipment connection. Attach a one-line diagram, route plan, elevations, and applicable specification sections. Note required accessories or special construction only when supported by project documents, and distinguish confirmed requirements from items still under engineering review.

Also provide the project location, requested delivery timing, receiving constraints, and contact details for technical questions. Identify the responsible engineer and the parties approving interfaces, ratings, and installation conditions. The manufacturer can use these inputs to prepare a project-specific proposal for new busway; final selection and installation details remain subject to engineering review and applicable authority approval.

PROJECT PARAMETERS

Details make
the difference.

Every project is different. Use these points as a starting place for a conversation about your requirements.

Discuss your specifications
SPECIFICATION OVERVIEW01 — 06
Project specification overview
Equipment & scopeDefined by project requirements
Voltage classConfirm for the application
Current ratingConfirm for the application
Applicable standardsUL 891 for applicable low-voltage switchboards; other standards per specification
ManufacturingMade in USA with American components
Lead timeQuoted per project

Final configuration, ratings, standards, and timing are confirmed with your quote.

LET'S GET TO WORK

Tell us what
you’re building.

Share the essentials and start a conversation about equipment for your project.

Prefer to talk?(951) 403-5738

Email our team at saleselectricalbuyers@gmail.com.

SWITCHGEAR BUILDERS OHIO
BUILT FOR THE WORK AHEAD

PROJECT INQUIRY

Request a quote

This form opens your email application where supported. Review and send your request to saleselectricalbuyers@gmail.com from your email app; nothing is submitted directly through this website.

* Required fields