Request a Quote

Switchgear knowledge center

Voltage Transformer Definition

A voltage transformer, also called a potential transformer, reproduces system voltage at a reduced, defined level so instruments and relays can measure it safely and consistently. Its application and connection must match the system design.

01 / BUILT WITH PURPOSE SWITCHGEAR BUILDERS OHIO

Electrical distribution lineups in a spacious equipment facility
REPRESENTATIVE
EQUIPMENT
01
Made in USAAmerican manufacturing
02
UL 891 assembliesFor applicable low-voltage switchboards
03
Short lead timesTiming quoted per project

Definition and purpose

A voltage transformer is an instrument transformer that produces a scaled-down representation of the voltage in an electrical circuit. Its secondary voltage is intended for measurement, indication, metering, or protective relays, rather than for supplying ordinary power loads. It lets connected devices work with a signal suited to their design.

The term potential transformer, or PT, is commonly used for this device; voltage transformer, or VT, is widely used in standards and industry. In either case, the key function is voltage transformation and signal isolation. It is distinct from a power transformer, which transfers energy to serve loads.

How the voltage signal is used

A VT can provide input to voltmeters, multifunction meters, synchronizing equipment, or protective relays. Depending on the application, the devices use phase-to-phase or phase-to-ground voltage values to display conditions, calculate power quantities, check synchronization, or identify abnormal system states.

The transformer ratio relates its primary and secondary voltages. For example, a device connected to a higher system voltage provides a lower nominal secondary signal selected for the instruments or relays. The ratio, accuracy requirements, and connected burden must be coordinated; a secondary signal is not automatically suitable for every device.

Voltage transformers versus current transformers

Voltage transformers measure voltage by providing a scaled voltage signal, while current transformers provide a scaled current signal. Their primary connections and secondary-circuit practices differ. A VT secondary is generally treated as a voltage source, whereas a CT secondary must not be left open while primary current flows.

The two instrument transformers may work together in a metering or protection scheme, but they are not interchangeable. Specify each function separately, including ratios, accuracy needs, wiring, and connected equipment. Relay and meter manufacturers’ input requirements should be checked before selecting either transformer or finalizing a switchgear arrangement.

System voltage, connection, and grounding

Selection starts with the nominal and maximum system voltage, frequency, and grounding method, along with the point where the transformer will connect. The design must establish whether phase-to-phase or phase-to-ground measurement is required and whether one, two, or three voltage signals are needed.

Connection choices affect what a relay or meter can observe. A grounded-wye arrangement, for example, differs from a phase-to-phase connection or a scheme using an open-delta secondary. The responsible engineer should confirm grounding, fusing, insulation coordination, and intended functions against the one-line diagram and applicable utility requirements.

Accuracy, burden, and protection needs

Metering and protection can place different demands on a VT. Metering may require accuracy across expected operating conditions, while protective relaying depends on a dependable signal during the conditions the scheme is designed to detect. Specify the required accuracy class and burden using the connected instruments’ documentation and system study.

Burden includes the electrical load of connected meters, relays, and wiring. Excessive burden or unsuitable lead length can affect secondary voltage and measurement performance. Confirm the total connected load, cable run, device input, and any separate metering and protection requirements rather than assuming one transformer configuration suits every circuit.

Physical placement and switchgear integration

In a switchboard or switchgear lineup, the VT’s location and primary connection must fit the equipment layout and operating sequence. Depending on design, it may be installed in a compartment, connected through primary fuses, or arranged for withdrawal. These details affect access, isolation, maintenance, and coordination with adjacent equipment.

Confirm the required equipment type and applicable standard for the assembly: UL 891 applies to low-voltage switchboards, while UL 1558 applies to low-voltage switchgear. Neither standard covers medium-voltage equipment. For medium-voltage applications, identify the system class and applicable requirements separately; do not infer a rating from low-voltage terminology.

Information to provide for a quotation

A useful request identifies the equipment type, system nominal and maximum voltage, frequency, grounding, one-line diagram, VT quantity, primary and secondary connection, ratio, and required metering or protection functions. Include relay and meter models or input specifications, accuracy and burden needs, and whether separate circuits are required.

Also provide lineup details, compartment or mounting preferences, primary fuse requirements if specified by the design, control wiring expectations, environmental conditions, and project standards. Identify the utility interface and delivery destination. A U.S. manufacturer building new equipment can review these inputs for custom fabrication and nationwide shipment; final design details remain subject to engineering review.

Engineering review and commissioning considerations

Before release, the responsible engineer should verify ratios, polarity, phase relationships, grounding, fusing, insulation requirements, and compatibility with the selected meters and relays. The utility and authority having jurisdiction should review applicable service and code requirements. Any open design assumptions should be resolved before drawings and equipment configuration are finalized.

At installation and commissioning, qualified personnel should verify wiring against approved drawings and follow equipment and instrument manufacturers’ instructions. Secondary circuits, protective devices, labels, and relay settings need appropriate checks for the intended scheme. A VT supplies a measurement signal; it does not replace system studies or determine protection settings by itself.

PROJECT PARAMETERS

Details make
the difference.

Every project is different. Use these points as a starting place for a conversation about your requirements.

Discuss your specifications
SPECIFICATION OVERVIEW01 — 06
Project specification overview
Equipment & scopeDefined by project requirements
Voltage classConfirm for the application
Current ratingConfirm for the application
Applicable standardsUL 891 for applicable low-voltage switchboards; other standards per specification
ManufacturingMade in USA with American components
Lead timeQuoted per project

Final configuration, ratings, standards, and timing are confirmed with your quote.

LET'S GET TO WORK

Tell us what
you’re building.

Share the essentials and start a conversation about equipment for your project.

Prefer to talk?(951) 403-5738

Email our team at saleselectricalbuyers@gmail.com.

SWITCHGEAR BUILDERS OHIO
BUILT FOR THE WORK AHEAD

PROJECT INQUIRY

Request a quote

This form opens your email application where supported. Review and send your request to saleselectricalbuyers@gmail.com from your email app; nothing is submitted directly through this website.

* Required fields