Request a Quote

Switchgear knowledge center

When Is an MCC Used Instead of a Switchboard?

Choose an MCC when a facility needs coordinated control and protection for multiple motors; choose a switchboard for broader power distribution. The right configuration depends on loads, system design, and operating needs.

01 / BUILT WITH PURPOSE SWITCHGEAR BUILDERS OHIO

Electrical equipment sections on a flatbed trailer outdoors
REPRESENTATIVE
EQUIPMENT
01
Made in USAAmerican manufacturing
02
UL 891 assembliesFor applicable low-voltage switchboards
03
Short lead timesTiming quoted per project

Start with the loads being served

A motor control center (MCC) is typically selected when a facility has several motors whose starting, stopping, protection, and control functions should be organized together. Examples include pumps, fans, conveyors, compressors, and process machinery. The motors may serve one production area or a group of related systems.

A switchboard is generally intended to distribute power among feeders and branch circuits, such as circuits serving panels, equipment, or building systems. It can supply motor loads, but it is not inherently a centralized collection of motor starters. Identify what each outgoing circuit serves before deciding which assembly best fits.

When grouped motor control is the priority

An MCC can be appropriate when operators and maintenance staff need motor-control components arranged in a common lineup. Depending on the design, individual sections may accommodate starters, variable frequency drives, soft starters, or other motor-related equipment. The required control method and protection scheme must be established for each motor.

Grouping can make circuit identification and access to motor-control devices more consistent across a process area. It does not, by itself, determine whether equipment can remain energized during work or establish a safety procedure. Confirm operating practices, isolation requirements, access clearances, and applicable project standards with the responsible engineering team.

When general distribution is the priority

A switchboard is often the better starting point when the main requirement is to receive power and distribute it to multiple downstream loads. Its arrangement may include a main device, feeder devices, metering, and provisions for future circuits, subject to the project specification and equipment design.

For a facility with many unlike loads—such as lighting panels, HVAC equipment, receptacle distribution, and packaged machinery—a switchboard may offer a more direct distribution approach. Motors can be among its feeders, but separate starters or local control equipment may still be needed. Compare the complete power and control path, not just the enclosure.

Compare the one-line and control requirements

The single-line diagram helps establish the source, voltage, phases, fault-current conditions, main and feeder arrangement, and connection to downstream equipment. For an MCC, also document motor horsepower, full-load current, starting method, duty, control voltage, and any drive or bypass requirements that affect unit selection.

Control diagrams and operating descriptions clarify whether motors run locally, from a control room, or through a process control system. Confirm interlocks, alarms, communication protocols, and control power needs rather than assuming a standard arrangement. The responsible engineer should coordinate these details with the equipment supplier and any system integrator.

Check ratings, environment, and installation limits

Available fault current, system grounding, voltage, continuous load, and protective-device coordination affect both equipment selection and configuration. Confirm the required interrupting or withstand ratings against the project calculations and applicable equipment standards. A motor-control lineup and a distribution switchboard are not interchangeable solely because both connect to a power source.

Room dimensions, working space, cable entry, conduit locations, ventilation, ambient conditions, and access for installation can shape the lineup. Also identify indoor or outdoor placement and any specified enclosure or environmental requirements. These are project-specific items to verify with the engineer, installer, utility where applicable, and authority having jurisdiction.

Understand construction and standards distinctions

Low-voltage switchboards built to UL 891 are distinct from low-voltage switchgear built to UL 1558. The assembly type, construction, ratings, and project specification determine which category is appropriate; neither designation should be used as a substitute for checking the actual design requirements.

MCC construction is selected around motor-control units and the specified application, while medium-voltage equipment is a separate design category with different system and equipment considerations. Do not infer a standard, listing, or voltage capability from the term MCC. Confirm the requested construction and applicable standards for the specific new equipment build.

Consider operation, maintenance, and future changes

Ask how staff will identify and operate each motor or feeder, what maintenance access is needed, and whether production plans call for spare units or future circuits. An MCC may suit a motor-dense process with recurring control needs; a switchboard may suit a distribution point feeding varied downstream systems.

Future expansion should be described concretely: anticipated motor additions, drive changes, load growth, or new feeder destinations. Spare space, bus capacity, and provisions for later modifications depend on the selected construction and must be specified and reviewed. Avoid assuming that an empty section automatically supports any future load or device.

Prepare a useful equipment quote request

For a quote, provide the one-line diagram, load schedule, system voltage, available fault current, grounding method, and required main and feeder devices. For an MCC, include a motor list with horsepower, current, starting method, control scheme, and drive details. Note metering, communications, enclosure, and documentation requirements.

Include the installation location, room or lineup constraints, cable-entry preferences, target delivery needs, and any governing specifications. A U.S. manufacturer can build new switchgear and distribution equipment with American components, provide custom fabrication, and ship nationwide, including to Ohio. Final design details should be checked by the responsible engineer and relevant reviewing parties.

PROJECT PARAMETERS

Details make
the difference.

Every project is different. Use these points as a starting place for a conversation about your requirements.

Discuss your specifications
SPECIFICATION OVERVIEW01 — 06
Project specification overview
Equipment & scopeDefined by project requirements
Voltage classConfirm for the application
Current ratingConfirm for the application
Applicable standardsUL 891 for applicable low-voltage switchboards; other standards per specification
ManufacturingMade in USA with American components
Lead timeQuoted per project

Final configuration, ratings, standards, and timing are confirmed with your quote.

LET'S GET TO WORK

Tell us what
you’re building.

Share the essentials and start a conversation about equipment for your project.

Prefer to talk?(951) 403-5738

Email our team at saleselectricalbuyers@gmail.com.

SWITCHGEAR BUILDERS OHIO
BUILT FOR THE WORK AHEAD

PROJECT INQUIRY

Request a quote

This form opens your email application where supported. Review and send your request to saleselectricalbuyers@gmail.com from your email app; nothing is submitted directly through this website.

* Required fields